TRESU Chamber Doctor Blade systems

In order to control the amount of ink on the printing plate, a doctor blade is used to efficiently remove excess ink from the anilox roll before inking the printing plate.

Chamber doctor blades systems contain a measured amount of ink transferred to the cells of the anilox roll. The doctoring quality of the doctor blades is important for the ability to transfer the right amount of ink from the chamber doctor blade systems to the anilox rolls.

Chamber doctor blades systems are supplied with a range of different suspensions matching the printing press and are also supplied in different materials - aluminum, carbon fiber or with a ceramic surface - and with doctor blades in polymer or steel as well as end seals in foam, felt, EPDM, FKM or PUR - all depending on the application and the setup.

With the TRESU Chamber Doctor Blade system the printing quality is constant and reproducible with fast job changes and a smooth and cost efficient ink metering. TRESU's genuine, proven and engineered cost efficient chamber doctor blade systems are based on 40 years of experience working with leading brands in printing.

Perfect cleaning of anilox roller with high pressure cleaning procedure and you will have low maintenance efforts in general. The TRESU Seal ensures the highest sealing quality and longest life time.

If you are looking to buy doctor blades you can shop in our online webshop here.

DOCTOR BLADE FAST CLAMPING SYSTEMS   

 S-LINE 

 E-LINE

 P-LINE

 Clamping system using screws

 TRESU Patent

 TRESU Patent

 Good for all width up to 6000 mm

 Good for width up to 2000 mm

 Good for all width up to 6000 mm

 Standard way of clamping

 Eccentric clamping – NO screws

 Pneumatic Clamping system

 

 Fast blade change in 1-2 minutes

 Fast blade change in less than1 minute

 Animations

 E-Line blade exchange
Afspil_Eline


 P-Line blade exchange
Afspil_Pline
MP4


Movies with Flexo Concepts®
TruePoint Orange® and Green®

E-Line blade exchange 
TRESU XL Blade Holder E-Line FlexoConcept TruPoint Orange web

P-Line blade exchange 
TRESU XL Blade Holder P-Line FlexoConcept TruPoint Green web

 

Further FlexoConcepts® combinations on TRESU YouTube


More info on FlexoConcepts® TruPoint Orange® here.


Further FlexoConcepts® combinations on TRESU YouTube


More info on FlexoConcepts® TruPoint Green® here


 CHAMBER SURFACE

  

 HA-S

 CFX

 CFC

Hard Anodized-S surface with good repelling capabilities in connection with inking and cleaning procedure Ceramic surface for flexo printing with high corrosion resistance and efficient 
repelling capabilities in connection with inking and cleaning procedures
Carbon Fibre Chamber with unique ink-repellent surface and high corrosion 
resistance for extra protection against ink and detergents


 

 

BROCHURE 

TRESU XL Blade Holder for coating and printing presses - FlexoConcept® TruPoint Orange®

TRESU XL Blade Holder
[PDF]
EN |